Description
LDCK Electro-Magnetic Flow Meter, high accuracy as well as reliability of LDCK Smart Electro-Magnetic Flow Meter is based on our consistent technical improving and up-grading, the technology of which is reaching up to the advanced level in this country in terms of magnetic excitation, inner lining and intelligence techniques. It is suitable for measuring volumetric flow of conductive medium like acid, alkali or salt solutions, mud or mineral slush, paper pulp and waste water. Since there are no rim-parts within the Meter measuring-pipe, the flow passing through it will not create any additional pressure loss. The Meter measuring accuracy is not affected by the variation of medium physical parameters, like pressure, temperature, density (including solid-liquid ratio) and viscosity. High sensitivity, wide ranging capability, disturbance-proof ability, zero stability and working reliability are also its advantages.
Explosion-proof Flow Meter is available with Explosion-proof Class mdIIBT4
Standard: JB/T 9248-1999 Electro-magnetic Flowmeters
Verification Regulation: JJG 1029-2007 Verification Regulation of Vortex-shedding flowmeter
Installation
1. Fluid flow direction must be in compliance with the Arrow Direction indicated on Flow Meter;
2. To ensure the straight pipe length:? for flow meter inlet up-stream more than 5D; for flow meter outlet down-stream more than 3D (D means flow meter inner diameter);
3. Sensor must be well grounded; grounding resistance less than 10;
4. Installation shall be located at a place far away from strong AC magnetic field
Explosion-proof Flow Meter is available with Explosion-proof Class mdIIBT4
Standard: JB/T 9248-1999 Electro-magnetic Flowmeters
Verification Regulation: JJG 1029-2007 Verification Regulation of Vortex-shedding flowmeter
Installation
1. Fluid flow direction must be in compliance with the Arrow Direction indicated on Flow Meter;
2. To ensure the straight pipe length:? for flow meter inlet up-stream more than 5D; for flow meter outlet down-stream more than 3D (D means flow meter inner diameter);
3. Sensor must be well grounded; grounding resistance less than 10;
4. Installation shall be located at a place far away from strong AC magnetic field
